Equalize Preferences

Opening the Preferences Page

Equalize 2 introduces a new Preferences page where you can adjust settings. Click the menu button in the upper right corner and choose Show Preferences... to show the Preferences page:

Select the Show Preferences command as indicated above to show the Preferences page.

The following Preferences page appears:

Settings available from the Preferences Page

Analyzer block size (samples):

• Affects the frequency versus time resolution in the analyzer. Larger block sizes will result in a better frequency resolution, but will at the same time reduce the time resolution.

Analyzer tilt (db/oct.):

• You can tilt the frequency spectrum with an adjustable attenuation per octave. White noise will appear like a flat horizontal line when the tilt is set to 0 dB/octave. Pink noise can be set to appear like a flat horizontal line with the tilt set to 3 dB/octave.

Analyzer drop rate (dB/s):

• Defines how quickly the analyzer adapts to lower signal levels and is specified in decibels per second.

Show piano keyboard:

• Shows or hides the new piano keyboard display.

Tuning frequency (Hz):

• The tuning frequency for the piano keyboard display. You can enter the center frequency of the note A4 in Hertz (440 is the most common tuning).